H&R TRAK+® spoorverbreders verbeteren het uiterlijk en het rijgedrag van uw auto met H&R TRAK+® . TRAK+® spoorverbreders zijn compatibel met zowel de standaardwielen als de aftermarketwielen. hieronder een paar voordelen van de spoorverbreders:
- Uw auto krijgt zowel een sportiever als een pittiger uiterlijk. De auto ziet er ook breder uit, omdat de wielen verder naar buiten komen te staan.
- Spoorverbreders creëren meer ruimte voor bredere banden.
- Spoorverbreders verbeteren de prestaties van de auto. Met spoorverbreders op de voorwielen ligt uw auto stabieler op de weg. Montage van spoorverbreders op de achterwielen zorgt ervoor dat u de auto gemakkelijker kunt insturen.
- Door het gebruik van spoorverbreders is er meer ruimte voor grotere remmen.
- Als u velgen met een hoge ET-waarde heeft, zullen deze beter aansluiten
H&R DR-System Wheelspacers 8mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 8mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen - Black
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 8mm 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Nissan
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the front axle (ask for more detailed info)
H&R DR-System Wheelspacers 9mm 5x127 - Hub 71,6mm - Bolt size M14x1,5 - Jeep
H&R DR-System Wheel spacers:- 9mm per spacer - 18mm per axle - Bolt pattern 5x127 - Hub 71,6mm - Bolt size M14x1,5 - Jeep H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DRA PCD Adapter-System 20mm 4x108-4x100 - Hub 63,3mm-57,1mm - Bolt size M12x1.50
H&R DRA PCD Adapter-System 40mm per axle - Bolt pattern 4x108-4x100 - Hub 63,3mm-57,1mm - Bolt size M12x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Ford Adapter 40mm per axle Bolt size M12x1.50 Bolt pattern from 4x108 to 4x100 Hub from 63,3mm to 57,1mm
H&R DRA PCD Adapter-System 20mm 5x100-5x112 - Hub 57,1mm->57,1mm - Bolt size M14x1.50
H&R DRA PCD Adapter-System 40mm per axle - Bolt pattern 5x100-5x112 - Hub 57,1mm->57,1mm - Bolt size M14x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! : Audi/Seat/Skoda/Volkswagen Adapter 40mm per axle Bolt size M14x1.50 Bolt pattern from 5x100 to 5x112 Hub from 57,1mm to 57,1mm
H&R DRA PCD Adapter-System 20mm 5x108-5x112 - Hub 65,0mm->66,5mm - Bolt size M12x1.50
H&R DRA PCD Adapter-System 40mm per axle - Bolt pattern 5x108-5x112 - Hub 65,0mm->66,5mm - Bolt size M12x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Citroën/Peugeot Adapter 40mm per axle Bolt size M12x1.50 Bolt pattern from 5x108 to 5x112 Hub from 65,0mm to 66,5mm
H&R DRA PCD Adapter-System 20mm 5x112-5x100 - Hub 57,1mm->57,1mm - Bolt size M14x1.50
H&R DRA PCD Adapter-System 40mm per axle - Bolt pattern 5x112-5x100 - Hub 57,1mm->57,1mm - Bolt size M14x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! : Audi/Seat/Skoda/Volkswagen Adapter 40mm per axle Bolt size M14x1.50 Bolt pattern from 5x112 to 5x100 Hub from 57,1mm to 57,1mm
H&R DRA PCD Adapter-System 22mm 5x112-5x112 - Hub 66.5mm->57,1mm - Bolt size M14x1.50
H&R DRA PCD Adapter-System 44mm per axle - Bolt pattern 5x112-5x112 - Hub 66.5mm->57,1mm - Bolt size M14x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Adapter 50mm per axle Bolt size M14x1.50 Bolt pattern from 5x112 to 5x112 Hub from 66,5mm to 57,1mm
H&R DRA PCD Adapter-System 25mm 4x100-5x130 - Hub 57,1mm->71,6mm - Bolt size M12x1.50
H&R DRA PCD Adapter-System 50mm per axle - Bolt pattern 4x100-5x130 - Hub 57,1mm->71,6mm - Bolt size M12x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! : Audi/BMW E30/Seat/Skoda/Volkswagen Adapter 50mm per axle Bolt size M12x1.50 Bolt pattern from 4x100 to 5x130 Hub from 57,1mm to 71,6mm
H&R DRA PCD Adapter-System 25mm 4x100-5x130 - Hub 60,1mm->71,6mm - Bolt size M12x1.50
H&R DRA PCD Adapter-System 50mm per axle - Bolt pattern 4x100-5x130 - Hub 60,1mm->71,6mm - Bolt size M12x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Renault Adapter 50mm per axle Bolt size M12x1.50 Bolt pattern from 4x100 to 5x130 Hub from 60,1mm to 71,6mm
H&R DRA PCD Adapter-System 25mm 4x98-5x130 - Hub 58,0mm->71,6mm - Bolt size M12x1.50
H&R DRA PCD Adapter-System 50mm per axle - Bolt pattern 4x98-5x130 - Hub 58,0mm->71,6mm - Bolt size M12x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Alfa/Fiat Adapter 50mm per axle Bolt size M12x1.50 Bolt pattern from 4x98 to 5x130 Hub from 58,0mm to 71,6mm
H&R DRA PCD Adapter-System 25mm 5x100-5x112 - Hub 57,1mm->57,1mm - Bolt size M14x1.50
H&R DRA PCD Adapter-System 50mm per axle - Bolt pattern 5x100-5x112 - Hub 57,1mm->57,1mm - Bolt size M14x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! : Audi/Seat/Skoda/Volkswagen Adapter 50mm per axle Bolt size M14x1.50 Bolt pattern from 5x100 to 5x112 Hub from 57,1mm to 57,1mm
H&R DRA PCD Adapter-System 25mm 5x98-5x130 - Hub 58,0mm->71,6mm - Bolt size M14x1.50
H&R DRA PCD Adapter-System 50mm per axle - Bolt pattern 5x98-5x130 - Hub 58,0mm->71,6mm - Bolt size M14x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Alfa/Fiat Adapter 50mm per axle Bolt size M14x1.50 Bolt pattern from 5x98 to 5x130 Hub from 58,0mm to 71,6mm
H&R DRA PCD Adapter-System 30mm 4x100-5x130 - Hub 57,1mm->71,6mm - Bolt size M12x1.50
H&R DRA PCD Adapter-System 60mm per axle - Bolt pattern 4x100-5x130 - Hub 57,1mm->71,6mm - Bolt size M12x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! : Audi/BMW E30/Seat/Skoda/Volkswagen Adapter 60mm per axle Bolt size M12x1.50 Bolt pattern from 4x100 to 5x130 Hub from 57,1mm to 71,6mm
H&R DRA-System Wheelspacers 20mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Opel
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Opel H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Fiat
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Fiat H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x110 - Hub 65,0mm - Bolt size M12x1,25 - Alfa Romeo
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M12x1,25 - Alfa Romeo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x110 - Hub 65,0mm - Bolt size M14x1,5 - Alfa/Jeep/Opel
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M14x1,5 - Alfa/Jeep/Opel H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Only installation on the front axle (ask for more detailed info)
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Only installation on the front axle (ask for more detailed info)
H&R DRA-System Wheelspacers 20mm 5x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Fiat
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Fiat H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 21mm 5x110 - Hub 65,0mm - Bolt size M12x1,25 - Jeep
H&R DRA-System Wheel spacers:- 21mm per spacer - 42mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M12x1,25 - Jeep H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 21mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Skoda/Volkswagen
H&R DRA-System Wheel spacers:- 21mm per spacer - 42mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 21mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Skoda/Volkswagen - Black
H&R DRA-System Wheel spacers:- 21mm per spacer - 42mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 21mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi/Cupra
H&R DRA-System Wheel spacers:- 21mm per spacer - 42mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi/Cupra H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims