H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Nissan Micra: Bolt size M12x1,25 Renault Clio D (IV) Type R and Smart: Using the spacers with steel rims is not possible.

H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Renault Clio and Smart: Using the spacers with steel rims is not possible.

H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Attention: Audi - Bolt size M14x1,5 - Bolt pattern 4x108

H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Attention: Audi - Bolt size M14x1,5 - Bolt pattern 4x108

H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.

H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Mazda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included! Mazda 2 Type DY: Attention: By using spacers the rear axle wheel hub have to be sealed watertight!

H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x108 - Hub 65,0mm - Bolt size M12x1,25 - Peugeot H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!

H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda/Rover H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan 200SX S13 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Hyundai H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Volvo/Mitsubishi/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x130 - Hub 78,6mm - Bolt size M14x1,5 - Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!

H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Fiat/Ford/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.

H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Fiat/Ford/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!

H&R DRS-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

H&R DRM-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 56,0mm - Bolt size M12x1,25 - Subaru H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Using the spacers with steel rims is not possible.

H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Skoda Fabia RS Type 5J only for rear axle. Using the spacers with steel rims is not possible.

H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Skoda Fabia RS Type 5J only for rear axle. Using the spacers with steel rims is not possible.

H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100/112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Audi 80 Type B4/89Q & Audi 100 (Q)/200 Type 44/44Q/C4: Bolt pattern 5x112 Skoda Superb Type 3U: Bolt pattern 5x112 Skoda Fabia: only for rear axle. Using the spacers with steel rims is not possible.

H&R DR-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100/112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Audi 80 Type B4/89Q & Audi 100 (Q)/200 Type 44/44Q/C4: Bolt pattern 5x112 Skoda Superb Type 3U: Bolt pattern 5x112 Skoda Fabia: only for rear axle. Using the spacers with steel rims is not possible.